Fusion machine

Sample preparation is the main error source for XRF measurement. With high temperature, the fusion machine can fuse samples into even glass slide. It can reduce the sample error arisen from mineral effect, particle effect and unevenness. Fusion system has been widely used as a necessary device for XRF sample preparation. High-frequency induction fusion system has some features, like good repeatability, high precision, short sample preparation time, low cost and so on. It has been widely used in iron & steel, metallurgical, cement, inspection, chemical and other industries. Model: FFV 2D FFV 2D+ FFV 4D FFV 4D+ FFV 8C Features: Quick sample preparation, 6-10 minutes for every sample preparation including cooling time. Moulding method to lower crucible cost. Manual or automatic moulding can be selected by customers. Automatic moulding can decrease interference. Shaking and pouring can let sample mix completely. Applying PLC controller with life more than 100000 hours. Touch-screen is easy for operation. Safe operation with exhaust system. Without preheating or keeping temperature. Real-time infrared temperature measurement. Sample treatment: Oxide Cement, carbonate, silicate, ceramics, furnace blast, glass, sand Geological samples Sulfide Bauxite, fluoride Catalyst Pure metal, ferroalloys and other alloys Indicators: ModelSample No. Moulding modeDimensions (mm)PowerWeightFFV2D1Manual- moulding mode Single-crucible & single-mould 660X700X5304KW40KgFFV2D+1Automatic- moulding mode Single-crucible & single-mould 660X700X5304KW40KgFFV4D2Manual- moulding mode Double-crucible & double-mould 660X700X5306KW40KgFFV4D+4Automatic- moulding mode Double-crucible & double-mould 780X760X5806KW60KgFFV8C4Automatic- crucible bottom moulding 780X760X5804KW60Kg